Tetraschutz

Tetrosyl TSH010 Tetraschutz 1L
A fine textured, fast drying bitumen based product, Tetraschutz provides excellent rust protection and sound deadening qualities. Suitable for all lower body panels requiring enhanced protection. Tetraschutz is not suitable for overcoating.

Directions for Use:

Shake can thoroughly before use (Minimum of 2 minutes).
Spray at a pressure of 70/90 p.s.i (Bar 5/6) and at a distance of 30-45cm.
Drying time: 2 hours at 20°
Tetraschutz may be applied with a roller or a brush but drying times may be affected
Note: Always ensure the surface to be treated is suitably prepared, and fully degreased with Tetrosyl Compliant Panel Wipe. Check that the spray gun is clean and free from blockages (excess pressure may cause the can to burst).

Coverage:

Approximately 3 square metres per litre.

Storage:

This product is subject to regulations governing the storage of highly flammable liquids and liquefied petroleum gases.

Supplementary Information.

Fast drying time
Provides rust protection
Provides sound deadening qualities
Protects bodywork